AMERICAN INDUSTRIAL SUPPLY INC -- RTV GASKET MAKER RED  -- 8030-00N091075
<pre>=====================  Product Identification  =====================

Product ID:RTV GASKET MAKER RED
MSDS Date:10/13/1993
FSC:8030
NIIN:00N091075
Status Code:A
=== Responsible Party ===
Company Name:AMERICAN INDUSTRIAL SUPPLY INC
Address:4514 VANOWEN ST.
City:BURBANK
State:CA
ZIP:91510-0996
Country:US
Info Phone Num:818-841-7788
Emergency Phone Num:1-800-255-3924
Preparer's Name:R C
CAGE:0WE73
=== Contractor Identification ===
Company Name:AMERICAN INDUSTRIAL SUPPLY INC
Address:4514 VANOWEN ST.
Box:10996
City:BURBANK
State:CA
ZIP:91506-0996
Country:US
Phone:800-366-0961/818-841-7788
CAGE:0WE73

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA 2482, HYDROPHOBIC; (SILICA, AMORPHOUS)
CAS:7631-86-9
RTECS #:VV7565000
Code:F
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:METHYLTRIACETOXYSILANE
CAS:4253-34-3
RTECS #:VV4500000
OSHA PEL:10 PPM
ACGIH TLV:10 PPM

Ingred Name:ETHYLTRIACETOXYSILANE
CAS:17689-77-9
OSHA PEL:10 PPM
ACGIH TLV:10 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE KNOWN.  INHALATION: VAPOR
    OVEREXPOSURE MAY IRRITATE EYES, NOSE, THROAT. EYE CONTACT: DIRECT
    CONTACT IRRITATES SLIGHTLY WITH SWELLING AND REDNESS. INGESTION:
    SWALLOWING LARGE AMOUNTS MAY SE RIOUSLY INJURE. SKIN CONTACT: SMALL
    EXPOSURE MAY IRRITATE. REPEATED PROLONGED CONTACT MAY IRRITATE
    MODERATELY.  CHRONIC: NONE KNOWN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOSE, THROAT, SKIN, AND DIGESTIVE
    SYSTEM.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
    ATTENTION. SKIN: WIPE OFF & FLUSH WITH WATER. IF IRRITATION
    DEVELOPS, GET MEDICAL ATTENTION.  INHALATION: REMOVE TO FRESH AIR,
    IF ILL EFFECTS  PERSIST, GET MEDICAL ATTENTION.  INGESTION: DO NOT
    INDUCE VOMITING. DRINK LARGE QUANTITY OF WATER. GET IMMEDIATE
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER,  WATER FOG, CO*2, DRY CHEMICAL FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE IF HEATED ABOVE
    130F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE PRODUCT AND CONTAIN FOR SALVAGE OR
    DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 80F.  KEEP OUT OF REACH OF
    CHILDREN.
Other Precautions:PRODUCT FORMS ACETIC ACID WHEN EXPOSED TO WATER OR
    HUMID AIR. PROVIDE VENTILATION OUTHOUSE TO CONTROL ACETIC ACID
    EXPOSURE LIMITS WITHIN 10 PPM.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NEEDED.  USE NIOSH APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST ADEQUATE.
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING AND SHOES AND WASH
    THOROUGHLY BEFORE REUSE. WASH HANDS AFTER HANDLING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Pres:<5 MMHG
Spec Gravity:1.03 (H*2O=1)
Solubility in Water:<0.1
Appearance and Odor:COLORED PASTE WITH ACETIC ACID-LIKE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A REACTION. AIR OR MOISTURE CAUSES BURNS
    & ACETIC ACID VAPORS FORM.
Stability Condition to Avoid:EXPOSURE TO AIR OR MOISTURE UNTIL READY TO
    USE.
Hazardous Decomposition Products:METAL OXIDES, SILICON DIOXIDE,CARBON
    DIOXIDE, TRACES OF INCOMPLETELY BURNED  CARBON PRODUCTS, INCLUDES
    FORMALDEHYDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
    AND FEDERAL REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:DOT HAZARD CLASSIFICATION: NON-HAZARDOUS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.