PPG INDUSTRIES INC CHEMICAL DIVISION -- DITZ-O WAX & GREASE REMOVER, DX440 -- 7930-01-301-5249 
=====================  Product Identification  =====================

Product ID:DITZ-O WAX & GREASE REMOVER, DX440
MSDS Date:07/27/1990
FSC:7930
NIIN:01-301-5249
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC CHEMICAL DIVISION
Address:ONE GATEWAY CENTER
City:PITTSBURGH
State:PA
ZIP:15222-1416
Country:US
Info Phone Num:412-434-3131
Emergency Phone Num:304-843-1300
CAGE:93915
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC CHEMICAL DIVISION
Address:ONE GATEWAY CENTER
City:PITTSBURGH
State:PA
ZIP:15222-1416
Country:US
Phone:304-843-1300
CAGE:93915

=============  Composition/Information on Ingredients  =============

Ingred Name:VM & P NAPHTHA
CAS:64742-89-8
Fraction by Wt: 30-35%
Other REC Limits:NONE RECOMMENDED

Ingred Name:XYLENE
CAS:1330-20-7
RTECS #:ZE2190000
Fraction by Wt: 65-70%
Other REC Limits:NONE RECOMMENDED
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION-HARMFUL OR FATAL IF
    SWALLOWED. EYE-CAUSES SEVERE EYE IRRITATION. SKIN-MAY CAUSE
    MODERATE SKIN IRRITATION. INHALATION-VAPOR OR SPRAY MIST MAY BE
    HARMFUL IF INHALED, VAPOR IRRITATES EYE, NOSE  & THROAT. REPEATED
    EXPOSURE TO HIGH VAPOR CONCENTRATIONS MAY CAUSE IRRITATION OF THE
    RESPIRATORY SYSTEM.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:-EYE WATERING, HEADACHES, NAUSEA,  DIZZINESS,
    AND LOSS OF COORDINATION ARE INDICATION THAT SOLVENTS LEVELS ARE
    TOO HIGH. -REDNESS, ITCHING, BURNING SENSATION AND VISUAL
    DISTURBANCES MAY INDICATE EXCES SIVE EYE CONTACT. -DRYNESS,
    ITCHING, CRACKING, BURNING, REDNESS & SWELLING ARE CONDITIONS
    ASSOCIATED WITH SKIN CONTACT.

=======================  First Aid Measures  =======================

First Aid:INGESTION-DO NOT INDUCE VOMITING. EYE-FLUSH EYES IMMEDIATELY
    WITH PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN-FLUSH IMMEDIATELY
    WITH PLENTY OF WATER FOLLOWED BY WASHING WITH SOAP AND WATER.
    INHALATION-R EMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION AND
    OTHER SUPPORTIVE MEASURES AS REQUIRED.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:=25.C, 77.F
Lower Limits:1.0
Extinguishing Media:USE NFPA CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY
    CHEMICAL OR UNIVERSAL AQUEOUS FILM FORMING FOAM).
Fire Fighting Procedures:WATER SPRAY MAY BE USED TO COOL CLOSED
    CONTAINERS TO PREVENT PRESSURE BUILDUP. FIRE-FIGHTERS SHOULD WEAR
    SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:KEEP CONTAINER TIGHTLY CLOSED. ISOLATE
    FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS & OPEN FLAMES. CLOSED
    CONTAINER MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
    EQUIPPED WITH PROPER RESPIRATORY OR SKIN & EYE EQUIPMENT SHOULD BE
    PERMITTED IN THE AREA. REMOVE ALL SOURCES OF IGNITION. TAKE UP
    SPILLED MATERIAL WITH SAWD UST, VERMICULITE OR THER ABSORBENT
    MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120 DEGREES F.
    STORE ABOVE 120F. STORE LARGE QUANTITIES IN BUILDINGS DESIGNED AND
    PROTECTED FOR STORAGE OF NFPA CLASS IC FLAMMABLE.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
    COATING SYSTEM, READ THE MSDS FOR THE COMPONENT OR COMPONENTS
    BEFORE BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF
    ALL OF ITS PARTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OVEREXPOSURE TO VAPORS MAY BE PREVENTED BY
    ENSURING VENTILATION CONTROLS, VAPOR EXHAUST OR FRESH AIR ENTRY,
    NIOSH/MSHAA-APPROVED PAINT SPRAY OR AIR SUPPLIED RESPIRATORS MAY
    ALSO REDUCE EXPOSURE.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
    VOLUME & PATTERN.
Protective Gloves:NITRILE RUBBER, NEOPRENE OR PVA GLOVES.
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING OR
    SHOES.
Supplemental Safety and Health
CONTAINERS SHOULD BE GROUNDED WHEN POURING.

==================  Physical/Chemical Properties  ==================

HCC:F3
Boiling Pt:=58.9C, 138.F
Vapor Pres:4 MMHG
Vapor Density:>AIR
Spec Gravity:0.84
Evaporation Rate & Reference:56 (N-BUTYL ACETATE=100)
Solubility in Water:0.0%
Appearance and Odor:NON-VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF
    THE SOLVENTS IN INGREDIENTS.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIS, STRONG MINERAL ACIDS, OR STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS DECOMPOSITION
    PRODUCTS WHEN HEATED, INCLUDING: CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH LOCAL, STATE AND FEDERAL REGULATIONS. EMPTY CONTAINERS SHOULD
    BE RECYCLED OR DISPOSED OF THROUGH AND APPROVED WASTE MANAGEMENT
    FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.