Hazard Statements

Precautionary Statements

8.2. Exposure controls Engineering measures: Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours. Personal protection: Personal protection equipment should be chosen according to the ANSI standards and in discussion with the supplier of the personal protective equipment. Respiratory equipment: In case of inadequate ventilation and work of brief duration, use suitable respiratory equipment. Hand protection: Risk of contact: Wear protective gloves. It is recommended to use gloves of Viton or nitrile rubber. Be aware that the liquid may penetrate the gloves. Frequent change is advisable. Other types of gloves can be recommended by the glove supplier. Eye protection: Risk of splashes: Wear goggles/face shield. Hygiene measures: Wash hands after handling. Do not eat, drink or smoke when using the product. Change contaminated clothing. Wash contaminated clothing before reuse. Environmental Exposure Controls: Not available.

SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: Follow precautions for safe handling described in this safety data sheet. Avoid inhalation of vapours and contact with skin and eyes. Do not smoke or use open fire, or other sources of ignition. 6.2. Environmental precautions Environmental precautions: Avoid discharge into drains, water courses or onto the ground. 6.3. Methods and material for containment and cleaning up Methods for cleaning up: Absorb spillage with non-combustible, absorbing material. Clean contaminated area with oil-removing material. 6.4. Reference to other sections Reference: For personal protection, see section 8. For waste disposal, see section 13.