BOB SMITH INDUSTRIES -- QUICK-CURE  -- 8010-00N050147
<pre>=====================  Product Identification  =====================

Product ID:QUICK-CURE
MSDS Date:10/30/1989
FSC:8010
NIIN:00N050147
=== Responsible Party ===
Company Name:BOB SMITH INDUSTRIES
Address:8060 MORRO RD
City:ATASCADERO
State:CA
ZIP:93422
Country:US
Info Phone Num:805-466-1717
Emergency Phone Num:800-223-7699
CAGE:BSMTH
=== Contractor Identification ===
Company Name:BOB SMITH INDUSTRIES
Address:8060 MORRO RD
Box:City:ATASCADERO
State:CA
ZIP:93422
Country:US
Phone:800-223-7699
CAGE:BSMTH

=============  Composition/Information on Ingredients  =============

Ingred Name:POLY-MERCAPTAN RESIN
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:BISPHENOL A EPOXY RESIN
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MILDLY IRRITATING TO SKIN, EYE, AND
    RESPIRATORY TRACT, PRLONGED EXPOSURE MAY CAUSE SKIN SENSITIZATION.
    MAY CAUSE FATIGUE, LABORED BREATHING, AND DIGESTIVE AND SKIN
    IRRITATION. INHAL:VAPORS MAY CAUSE I RRIT. SKIN:SLIGHT VOMIT.
    INGEST:LOW TOXICITY.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:MAY AGGRAVATE EXISTING SKIN, EYE,
    AND LUNG CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:WASH
    WITH SOAP AND WATER. INGEST:DO NOT INDUCE VOMITING. GIVE MILK OR
    WATE R TO DILUTE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:518F,270C
Extinguishing Media:WATER SPRAY, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . USE WATER SPRAY TO COOL FIRE-EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:USE WATER SPRAY TO DISPERSE VAPORS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID PERSONAL CONTACT. CONTAIN SPILL. WIPE UP
    WITH RAGS. DISPOSE OF IN A SUITABLE LABELED CONTAINER. AVOID
    BREATHING VAPORS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM HEAT. AVOID SKIN AND
    EYE CONTACT AND INHALATION OF VAPORS. KEEP CONTAINER CLOSED. DO NOT
    TAKE INTERNALLY.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
    VAPORS, IF NECESSARY.
Ventilation:LOCAL EXHAUST:RECOMMENDED FOR LARGE VOLUME WORK. MECHANICAL
    (GENERAL) USE WITH ADEQUATE VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:EMERG EYE WASH AND DELUGE SHOWER WHICH MEETS
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THORUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Vapor Density:1
Spec Gravity:1.15 (H*20=1)
Solubility in Water:SLIGHT
Appearance and Odor:WATER-WHITE TO LIGHT AMBER LIQUID, PUNGENT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS AND AMINE MIXTURES.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON DIOXIDE AND MONOXIDE, HYDROGEN
    SULFIDE, OXIDES OF SULFUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN LEGAL LANDFILL OR INCINERATE IN
    ACCORDANCE WITH APPLICABLE FEDERAL, STATE, AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.